On 01/23/2016 11:37 AM, amit mishra wrote:

Hi ,

I'm trying to boot beagle black rev c board I'm getting the below error:

default username:password is [debian:temppwd]

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

The IP Address for usb0 is: 192.168.7.2
beaglebone login: [ 24.171107] libphy: PHY 4a101000.mdio:01 not found
[ 24.176265] net eth0: phy 4a101000.mdio:01 not found on slave 1

I've connected Board through FTDI 6 pin USB to Serial cable.

Please help me to resolve this problem.

This list is not intended to be used to support individual embedded
Linux development boards.

I think you will be better served asking this on one of the BeagleBoard forums.
Please see http://beagleboard.org/Community/Forums
-- Tim